dmesg - TOSHIBA HDWD130
Linux version 4.16.13-1-ARCH (builduser@heftig-15406) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Thu May 31 23:29:29 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000da79bfff] usable
BIOS-e820: [mem 0x00000000da79c000-0x00000000dbc9ffff] reserved
BIOS-e820: [mem 0x00000000dbca0000-0x00000000dbd95fff] usable
BIOS-e820: [mem 0x00000000dbd96000-0x00000000dc172fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc173000-0x00000000dd166fff] reserved
BIOS-e820: [mem 0x00000000dd167000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000101f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd4c4b018-0xd4c55a57] usable ==> usable
e820: update [mem 0xd4c4b018-0xd4c55a57] usable ==> usable
e820: update [mem 0xd4c2c018-0xd4c4a057] usable ==> usable
e820: update [mem 0xd4c2c018-0xd4c4a057] usable ==> usable
e820: update [mem 0xd4c1b018-0xd4c2b857] usable ==> usable
e820: update [mem 0xd4c1b018-0xd4c2b857] usable ==> usable
e820: update [mem 0xd4c0d018-0xd4c1a657] usable ==> usable
e820: update [mem 0xd4c0d018-0xd4c1a657] usable ==> usable
e820: update [mem 0xd4bc1018-0xd4c0c257] usable ==> usable
e820: update [mem 0xd4bc1018-0xd4c0c257] usable ==> usable
e820: update [mem 0xd4ba7018-0xd4bc0857] usable ==> usable
e820: update [mem 0xd4ba7018-0xd4bc0857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
reserve setup_data: [mem 0x000000000400a000-0x0000000009cfffff] usable
reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000d4ba7017] usable
reserve setup_data: [mem 0x00000000d4ba7018-0x00000000d4bc0857] usable
reserve setup_data: [mem 0x00000000d4bc0858-0x00000000d4bc1017] usable
reserve setup_data: [mem 0x00000000d4bc1018-0x00000000d4c0c257] usable
reserve setup_data: [mem 0x00000000d4c0c258-0x00000000d4c0d017] usable
reserve setup_data: [mem 0x00000000d4c0d018-0x00000000d4c1a657] usable
reserve setup_data: [mem 0x00000000d4c1a658-0x00000000d4c1b017] usable
reserve setup_data: [mem 0x00000000d4c1b018-0x00000000d4c2b857] usable
reserve setup_data: [mem 0x00000000d4c2b858-0x00000000d4c2c017] usable
reserve setup_data: [mem 0x00000000d4c2c018-0x00000000d4c4a057] usable
reserve setup_data: [mem 0x00000000d4c4a058-0x00000000d4c4b017] usable
reserve setup_data: [mem 0x00000000d4c4b018-0x00000000d4c55a57] usable
reserve setup_data: [mem 0x00000000d4c55a58-0x00000000da79bfff] usable
reserve setup_data: [mem 0x00000000da79c000-0x00000000dbc9ffff] reserved
reserve setup_data: [mem 0x00000000dbca0000-0x00000000dbd95fff] usable
reserve setup_data: [mem 0x00000000dbd96000-0x00000000dc172fff] ACPI NVS
reserve setup_data: [mem 0x00000000dc173000-0x00000000dd166fff] reserved
reserve setup_data: [mem 0x00000000dd167000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000101f37ffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdbd96000 ACPI=0xdbd96000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd91c8e98 MEMATTR=0xd8e29018
SMBIOS 3.0.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X470 Taichi, BIOS L1.35A 05/10/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x101f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000001020000000 aka 66048M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d91c8e98 to 0x00000000d91c8ed0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 95000 size 24576
Using GB pages for direct mapping
BRK [0x412655000, 0x412655fff] PGTABLE
BRK [0x412656000, 0x412656fff] PGTABLE
BRK [0x412657000, 0x412657fff] PGTABLE
BRK [0x412658000, 0x412658fff] PGTABLE
BRK [0x412659000, 0x412659fff] PGTABLE
BRK [0x41265a000, 0x41265afff] PGTABLE
BRK [0x41265b000, 0x41265bfff] PGTABLE
BRK [0x41265c000, 0x41265cfff] PGTABLE
BRK [0x41265d000, 0x41265dfff] PGTABLE
BRK [0x41265e000, 0x41265efff] PGTABLE
BRK [0x41265f000, 0x41265ffff] PGTABLE
BRK [0x412660000, 0x412660fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f8b2000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBD96000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBD96098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBD9CBE8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
ACPI: DSDT 0x00000000DBD961E8 0069FB (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC15BE00 000040
ACPI: APIC 0x00000000DBD9CD00 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBD9CDE0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBD9CE28 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBD9CEC8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBDA5B60 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DBDA7E78 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBDA8DC8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBDA8DF8 002C36 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBDABA30 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000DBDABA70 0002B0 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DBDABD20 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBDABD58 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBDABD80 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000DBDABDC8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBDABE98 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DBDAD8E0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: WSMT 0x00000000DBDAD9D8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000101f37ffff]
NODE_DATA(0) allocated [mem 0x101f37c000-0x101f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000101f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000da79bfff]
node 0: [mem 0x00000000dbca0000-0x00000000dbd95fff]
node 0: [mem 0x00000000dd167000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000101f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000101f37ffff]
On node 0 totalpages: 16758560
DMA zone: 64 pages used for memmap
DMA zone: 43 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14033 pages used for memmap
DMA32 zone: 898049 pages, LIFO batch:31
Normal zone: 247758 pages used for memmap
Normal zone: 15856512 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xd4ba7000-0xd4ba7fff]
PM: Registered nosave memory: [mem 0xd4bc0000-0xd4bc0fff]
PM: Registered nosave memory: [mem 0xd4bc1000-0xd4bc1fff]
PM: Registered nosave memory: [mem 0xd4c0c000-0xd4c0cfff]
PM: Registered nosave memory: [mem 0xd4c0d000-0xd4c0dfff]
PM: Registered nosave memory: [mem 0xd4c1a000-0xd4c1afff]
PM: Registered nosave memory: [mem 0xd4c1b000-0xd4c1bfff]
PM: Registered nosave memory: [mem 0xd4c2b000-0xd4c2bfff]
PM: Registered nosave memory: [mem 0xd4c2c000-0xd4c2cfff]
PM: Registered nosave memory: [mem 0xd4c4a000-0xd4c4afff]
PM: Registered nosave memory: [mem 0xd4c4b000-0xd4c4bfff]
PM: Registered nosave memory: [mem 0xd4c55000-0xd4c55fff]
PM: Registered nosave memory: [mem 0xda79c000-0xdbc9ffff]
PM: Registered nosave memory: [mem 0xdbd96000-0xdc172fff]
PM: Registered nosave memory: [mem 0xdc173000-0xdd166fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 16496662
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65832948K/67034240K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1456K init, 640K bss, 1201292K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 31757 entries in 125 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI: 7 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3699.864 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa9a974335, max_idle_ns: 881590601050 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7402.05 BogoMIPS (lpj=12332880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD Ryzen 7 2700X Eight-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (118443.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdbd96000-0xdc172fff] (4050944 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:15:39, date: 07/03/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [1022:1453] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [8086:2700] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xf7a00000-0xf7a0ffff pref]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:03:00.0: [1022:43d0] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf70a0000-0xf70a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xf7080000-0xf709ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-2d]
pci 0000:00:01.3: bridge window [io 0xc000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xf5000000-0xf70fffff]
pci 0000:00:01.3: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:1d:00.0: PME# supported from D3hot D3cold
pci 0000:1d:02.0: [1022:43c7] type 01 class 0x060400
pci 0000:1d:02.0: PME# supported from D3hot D3cold
pci 0000:1d:03.0: [1022:43c7] type 01 class 0x060400
pci 0000:1d:03.0: PME# supported from D3hot D3cold
pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:1d:04.0: PME# supported from D3hot D3cold
pci 0000:1d:09.0: [1022:43c7] type 01 class 0x060400
pci 0000:1d:09.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 1d-2d]
pci 0000:03:00.2: bridge window [io 0xc000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xf5000000-0xf6ffffff]
pci 0000:03:00.2: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:1e:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:1e:00.0: reg 0x10: [mem 0xf6f00000-0xf6f07fff 64bit]
pci 0000:1e:00.0: PME# supported from D0
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:00.0: bridge window [mem 0xf6f00000-0xf6ffffff]
pci 0000:20:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:20:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:20:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:20:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:20:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:20:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:20:00.0: reg 0x24: [mem 0xf6e00000-0xf6e001ff]
pci 0000:1d:02.0: PCI bridge to [bus 20]
pci 0000:1d:02.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:02.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:21:00.0: [1b21:1184] type 01 class 0x060400
pci 0000:21:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:03.0: PCI bridge to [bus 21-2b]
pci 0000:1d:03.0: bridge window [io 0xc000-0xdfff]
pci 0000:1d:03.0: bridge window [mem 0xf5000000-0xf63fffff]
pci 0000:1d:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:26:01.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:01.0: PME# supported from D0 D3hot D3cold
pci 0000:26:03.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:03.0: PME# supported from D0 D3hot D3cold
pci 0000:26:05.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:05.0: PME# supported from D0 D3hot D3cold
pci 0000:26:07.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:07.0: PME# supported from D0 D3hot D3cold
pci 0000:21:00.0: PCI bridge to [bus 26-2b]
pci 0000:21:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:21:00.0: bridge window [mem 0xf5000000-0xf63fffff]
pci 0000:21:00.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:27:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:27:00.0: reg 0x10: [mem 0xf6300000-0xf6301fff 64bit]
pci 0000:27:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:01.0: PCI bridge to [bus 27]
pci 0000:26:01.0: bridge window [mem 0xf6300000-0xf63fffff]
pci 0000:28:00.0: [10de:0f02] type 00 class 0x030000
pci 0000:28:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
pci 0000:28:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:28:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:28:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:28:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:28:00.0: BAR 3: assigned to efifb
pci 0000:28:00.1: [10de:0bea] type 00 class 0x040300
pci 0000:28:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:26:03.0: PCI bridge to [bus 28]
pci 0000:26:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:26:03.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:26:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:2a:00.0: [8086:1539] type 00 class 0x020000
pci 0000:2a:00.0: reg 0x10: [mem 0xf6200000-0xf621ffff]
pci 0000:2a:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:2a:00.0: reg 0x1c: [mem 0xf6220000-0xf6223fff]
pci 0000:2a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:05.0: PCI bridge to [bus 2a]
pci 0000:26:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:26:05.0: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:26:07.0: PCI bridge to [bus 2b]
pci 0000:2c:00.0: [1d6a:d107] type 00 class 0x020000
pci 0000:2c:00.0: reg 0x10: [mem 0xf6c40000-0xf6c4ffff 64bit]
pci 0000:2c:00.0: reg 0x18: [mem 0xf6c50000-0xf6c50fff 64bit]
pci 0000:2c:00.0: reg 0x20: [mem 0xf6800000-0xf6bfffff 64bit]
pci 0000:2c:00.0: reg 0x30: [mem 0xf6c00000-0xf6c3ffff pref]
pci 0000:2c:00.0: supports D1 D2
pci 0000:2c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:1d:04.0: PCI bridge to [bus 2c]
pci 0000:1d:04.0: bridge window [mem 0xf6800000-0xf6cfffff]
pci 0000:1d:09.0: PCI bridge to [bus 2d]
pci 0000:2e:00.0: [1000:0087] type 00 class 0x010700
pci 0000:2e:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:2e:00.0: reg 0x14: [mem 0xf7840000-0xf784ffff 64bit]
pci 0000:2e:00.0: reg 0x1c: [mem 0xf7800000-0xf783ffff 64bit]
pci 0000:2e:00.0: reg 0x30: [mem 0xf7700000-0xf77fffff pref]
pci 0000:2e:00.0: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 2e]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf7700000-0xf78fffff]
pci 0000:2f:00.0: [15b3:1007] type 00 class 0x028000
pci 0000:2f:00.0: reg 0x10: [mem 0xf7600000-0xf76fffff 64bit]
pci 0000:2f:00.0: reg 0x18: [mem 0xee800000-0xeeffffff 64bit pref]
pci 0000:2f:00.0: reg 0x30: [mem 0xf7500000-0xf75fffff pref]
pci 0000:2f:00.0: reg 0x134: [mem 0xea800000-0xeaffffff 64bit pref]
pci 0000:2f:00.0: VF(n) BAR2 space: [mem 0xea800000-0xee7fffff 64bit pref] (contains BAR2 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 2f]
pci 0000:00:03.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:03.2: bridge window [mem 0xea800000-0xeeffffff 64bit pref]
pci 0000:30:00.0: [1022:145a] type 00 class 0x130000
pci 0000:30:00.0: enabling Extended Tags
pci 0000:30:00.2: [1022:1456] type 00 class 0x108000
pci 0000:30:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
pci 0000:30:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
pci 0000:30:00.2: enabling Extended Tags
pci 0000:30:00.3: [1022:145f] type 00 class 0x0c0330
pci 0000:30:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:30:00.3: enabling Extended Tags
pci 0000:30:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 30]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:31:00.0: [1022:1455] type 00 class 0x130000
pci 0000:31:00.0: enabling Extended Tags
pci 0000:31:00.2: [1022:7901] type 00 class 0x010601
pci 0000:31:00.2: reg 0x24: [mem 0xf7900000-0xf7900fff]
pci 0000:31:00.2: enabling Extended Tags
pci 0000:31:00.2: PME# supported from D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 31]
pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:28:00.0: vgaarb: setting as boot VGA device
pci 0000:28:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:28:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd4ba7018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd4bc1018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd4c0d018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd4c1b018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd4c2c018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd4c4b018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xda79c000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbd96000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x101f380000-0x101fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0280-0x028f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x02b0-0x02bf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:00.0: bridge window [mem 0xf6f00000-0xf6ffffff]
pci 0000:1d:02.0: PCI bridge to [bus 20]
pci 0000:1d:02.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:02.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:26:01.0: PCI bridge to [bus 27]
pci 0000:26:01.0: bridge window [mem 0xf6300000-0xf63fffff]
pci 0000:26:03.0: PCI bridge to [bus 28]
pci 0000:26:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:26:03.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:26:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:26:05.0: PCI bridge to [bus 2a]
pci 0000:26:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:26:05.0: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:26:07.0: PCI bridge to [bus 2b]
pci 0000:21:00.0: PCI bridge to [bus 26-2b]
pci 0000:21:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:21:00.0: bridge window [mem 0xf5000000-0xf63fffff]
pci 0000:21:00.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:1d:03.0: PCI bridge to [bus 21-2b]
pci 0000:1d:03.0: bridge window [io 0xc000-0xdfff]
pci 0000:1d:03.0: bridge window [mem 0xf5000000-0xf63fffff]
pci 0000:1d:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:1d:04.0: PCI bridge to [bus 2c]
pci 0000:1d:04.0: bridge window [mem 0xf6800000-0xf6cfffff]
pci 0000:1d:09.0: PCI bridge to [bus 2d]
pci 0000:03:00.2: PCI bridge to [bus 1d-2d]
pci 0000:03:00.2: bridge window [io 0xc000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xf5000000-0xf6ffffff]
pci 0000:03:00.2: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:01.3: PCI bridge to [bus 03-2d]
pci 0000:00:01.3: bridge window [io 0xc000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xf5000000-0xf70fffff]
pci 0000:00:01.3: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 2e]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf7700000-0xf78fffff]
pci 0000:00:03.2: PCI bridge to [bus 2f]
pci 0000:00:03.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:03.2: bridge window [mem 0xea800000-0xeeffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 30]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:00:08.1: PCI bridge to [bus 31]
pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf5000000-0xf70fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:1d: resource 0 [io 0xc000-0xefff]
pci_bus 0000:1d: resource 1 [mem 0xf5000000-0xf6ffffff]
pci_bus 0000:1d: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:1e: resource 1 [mem 0xf6f00000-0xf6ffffff]
pci_bus 0000:20: resource 0 [io 0xe000-0xefff]
pci_bus 0000:20: resource 1 [mem 0xf6e00000-0xf6efffff]
pci_bus 0000:21: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:21: resource 1 [mem 0xf5000000-0xf63fffff]
pci_bus 0000:21: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:26: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:26: resource 1 [mem 0xf5000000-0xf63fffff]
pci_bus 0000:26: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:27: resource 1 [mem 0xf6300000-0xf63fffff]
pci_bus 0000:28: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:28: resource 1 [mem 0xf5000000-0xf60fffff]
pci_bus 0000:28: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:2a: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:2a: resource 1 [mem 0xf6200000-0xf62fffff]
pci_bus 0000:2c: resource 1 [mem 0xf6800000-0xf6cfffff]
pci_bus 0000:2e: resource 0 [io 0xf000-0xffff]
pci_bus 0000:2e: resource 1 [mem 0xf7700000-0xf78fffff]
pci_bus 0000:2f: resource 1 [mem 0xf7500000-0xf76fffff]
pci_bus 0000:2f: resource 2 [mem 0xea800000-0xeeffffff 64bit pref]
pci_bus 0000:30: resource 1 [mem 0xf7200000-0xf74fffff]
pci_bus 0000:31: resource 1 [mem 0xf7900000-0xf79fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:28:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7476K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:01.3 to group 2
iommu: Adding device 0000:00:02.0 to group 3
iommu: Adding device 0000:00:03.0 to group 4
iommu: Adding device 0000:00:03.1 to group 5
iommu: Adding device 0000:00:03.2 to group 6
iommu: Adding device 0000:00:04.0 to group 7
iommu: Adding device 0000:00:07.0 to group 8
iommu: Adding device 0000:00:07.1 to group 9
iommu: Adding device 0000:00:08.0 to group 10
iommu: Adding device 0000:00:08.1 to group 11
iommu: Adding device 0000:00:14.0 to group 12
iommu: Adding device 0000:00:14.3 to group 12
iommu: Adding device 0000:00:18.0 to group 13
iommu: Adding device 0000:00:18.1 to group 13
iommu: Adding device 0000:00:18.2 to group 13
iommu: Adding device 0000:00:18.3 to group 13
iommu: Adding device 0000:00:18.4 to group 13
iommu: Adding device 0000:00:18.5 to group 13
iommu: Adding device 0000:00:18.6 to group 13
iommu: Adding device 0000:00:18.7 to group 13
iommu: Adding device 0000:01:00.0 to group 14
iommu: Adding device 0000:03:00.0 to group 15
iommu: Adding device 0000:03:00.1 to group 15
iommu: Adding device 0000:03:00.2 to group 15
iommu: Adding device 0000:1d:00.0 to group 15
iommu: Adding device 0000:1d:02.0 to group 15
iommu: Adding device 0000:1d:03.0 to group 15
iommu: Adding device 0000:1d:04.0 to group 15
iommu: Adding device 0000:1d:09.0 to group 15
iommu: Adding device 0000:1e:00.0 to group 15
iommu: Adding device 0000:20:00.0 to group 15
iommu: Adding device 0000:21:00.0 to group 15
iommu: Adding device 0000:26:01.0 to group 15
iommu: Adding device 0000:26:03.0 to group 15
iommu: Adding device 0000:26:05.0 to group 15
iommu: Adding device 0000:26:07.0 to group 15
iommu: Adding device 0000:27:00.0 to group 15
iommu: Adding device 0000:28:00.0 to group 15
iommu: Adding device 0000:28:00.1 to group 15
iommu: Adding device 0000:2a:00.0 to group 15
iommu: Adding device 0000:2c:00.0 to group 15
iommu: Adding device 0000:2e:00.0 to group 16
iommu: Adding device 0000:2f:00.0 to group 17
iommu: Adding device 0000:30:00.0 to group 18
iommu: Adding device 0000:30:00.2 to group 19
iommu: Adding device 0000:30:00.3 to group 20
iommu: Adding device 0000:31:00.0 to group 21
iommu: Adding device 0000:31:00.2 to group 22
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=24 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.1: AER enabled with IRQ 28
pcieport 0000:00:01.3: AER enabled with IRQ 29
pcieport 0000:00:03.1: AER enabled with IRQ 30
pcieport 0000:00:03.2: AER enabled with IRQ 31
pcieport 0000:00:07.1: AER enabled with IRQ 32
pcieport 0000:00:08.1: AER enabled with IRQ 34
pcieport 0000:00:01.1: Signaling PME with IRQ 28
pcieport 0000:00:01.3: Signaling PME with IRQ 29
pcieport 0000:00:03.1: Signaling PME with IRQ 30
pcieport 0000:00:03.2: Signaling PME with IRQ 31
pcieport 0000:00:07.1: Signaling PME with IRQ 32
pcieport 0000:00:08.1: Signaling PME with IRQ 34
efifb: probing for efifb
efifb: framebuffer at 0xe9000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
nvme nvme0: pci function 0000:01:00.0
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08008206
microcode: CPU1: patch_level=0x08008206
microcode: CPU2: patch_level=0x08008206
microcode: CPU3: patch_level=0x08008206
microcode: CPU4: patch_level=0x08008206
microcode: CPU5: patch_level=0x08008206
microcode: CPU6: patch_level=0x08008206
microcode: CPU7: patch_level=0x08008206
microcode: CPU8: patch_level=0x08008206
microcode: CPU9: patch_level=0x08008206
microcode: CPU10: patch_level=0x08008206
microcode: CPU11: patch_level=0x08008206
microcode: CPU12: patch_level=0x08008206
microcode: CPU13: patch_level=0x08008206
microcode: CPU14: patch_level=0x08008206
microcode: CPU15: patch_level=0x08008206
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (852515797, 0)->(931522089, -79006292)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 10:10:274
tty tty11: hash matches
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1456K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 688K
nvme0n1: p1 p2
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
mpt3sas version 17.100.00.00 loaded
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65963068 kB)
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
ahci 0000:03:00.1: version 3.0
xhci_hcd 0000:1e:00.0: xHCI Host Controller
xhci_hcd 0000:1e:00.0: new USB bus registered, assigned bus number 3
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
scsi host7: ahci
mpt2sas_cm0: MSI-X vectors supported: 16, no of cores: 16, max_msix_vectors: -1
scsi host8: ahci
ata1: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080100 irq 74
ata2: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080180 irq 74
ata3: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080200 irq 74
ata4: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080280 irq 74
ata5: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080300 irq 74
ata6: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080380 irq 74
ata7: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080400 irq 74
ata8: SATA max UDMA/133 abar m131072@0xf7080000 port 0xf7080480 irq 74
ahci 0000:20:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:20:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:20:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 75
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 76
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 77
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 78
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 79
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 80
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 81
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 82
mpt2sas0-msix8: PCI-MSI-X enabled: IRQ 83
mpt2sas0-msix9: PCI-MSI-X enabled: IRQ 84
mpt2sas0-msix10: PCI-MSI-X enabled: IRQ 85
mpt2sas0-msix11: PCI-MSI-X enabled: IRQ 86
mpt2sas0-msix12: PCI-MSI-X enabled: IRQ 87
mpt2sas0-msix13: PCI-MSI-X enabled: IRQ 88
mpt2sas0-msix14: PCI-MSI-X enabled: IRQ 89
mpt2sas0-msix15: PCI-MSI-X enabled: IRQ 90
mpt2sas_cm0: iomem(0x00000000f7840000), mapped(0x (ptrval)), size(65536)
mpt2sas_cm0: ioport(0x000000000000f000), size(256)
scsi host9: ahci
scsi host10: ahci
ata9: SATA max UDMA/133 abar m512@0xf6e00000 port 0xf6e00100 irq 91
ata10: SATA max UDMA/133 abar m512@0xf6e00000 port 0xf6e00180 irq 91
ahci 0000:31:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:31:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host11: ahci
ata11: SATA max UDMA/133 abar m4096@0xf7900000 port 0xf7900100 irq 93
xhci_hcd 0000:1e:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:1e:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:1e:00.0: xHCI Host Controller
xhci_hcd 0000:1e:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:1e:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb4: SerialNumber: 0000:1e:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:30:00.3: xHCI Host Controller
xhci_hcd 0000:30:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:30:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb5: SerialNumber: 0000:30:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:30:00.3: xHCI Host Controller
xhci_hcd 0000:30:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:30:00.3: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.16.13-1-ARCH xhci-hcd
usb usb6: SerialNumber: 0000:30:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
mpt2sas_cm0: sending message unit reset !!
mpt2sas_cm0: message unit reset: SUCCESS
mpt2sas_cm0: Allocated physical memory: size(18690 kB)
mpt2sas_cm0: Current Controller Queue Depth(10104),Max Controller Queue Depth(10240)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
mpt2sas_cm0: LSISAS2308: FWVersion(20.00.07.00), ChipRevision(0x05), BiosVersion(07.37.00.00)
mpt2sas_cm0: Protocol=(
Initiator
,Target
),
Capabilities=(
TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b008ece300), phys(8)
mpt2sas_cm0: expander_add: handle(0x0009), parent(0x0001), sas_addr(0x5001e67466247fff), phys(26)
random: fast init done
mpt2sas_cm0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x0011), sas_addr(0x5001e67466247fe7), phy(7), device_name(0x5000039fe6cfd758)
scsi 0:0:0:0: enclosure logical id (0x5001517e3b0bf0bf), slot(7)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x5001e67466247fe0), phy(0), device_name(0x5000039fe6e2ace9)
scsi 0:0:1:0: enclosure logical id (0x5001517e3b0bf0bf), slot(0)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x5001e67466247fe1), phy(1), device_name(0x5000039fe6e2caad)
scsi 0:0:2:0: enclosure logical id (0x5001517e3b0bf0bf), slot(1)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:3:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:3:0: SATA: handle(0x000c), sas_addr(0x5001e67466247fe2), phy(2), device_name(0x5000039fe6cf3c8b)
scsi 0:0:3:0: enclosure logical id (0x5001517e3b0bf0bf), slot(2)
scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:4:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:4:0: SATA: handle(0x000d), sas_addr(0x5001e67466247fe3), phy(3), device_name(0x5000039fe6da75ad)
scsi 0:0:4:0: enclosure logical id (0x5001517e3b0bf0bf), slot(3)
scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:5:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:5:0: SATA: handle(0x000e), sas_addr(0x5001e67466247fe4), phy(4), device_name(0x5000039fe6cfc9e0)
scsi 0:0:5:0: enclosure logical id (0x5001517e3b0bf0bf), slot(4)
scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:6:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:6:0: SATA: handle(0x000f), sas_addr(0x5001e67466247fe5), phy(5), device_name(0x5000039fe6e2c10d)
scsi 0:0:6:0: enclosure logical id (0x5001517e3b0bf0bf), slot(5)
scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:7:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 6
scsi 0:0:7:0: SATA: handle(0x0010), sas_addr(0x5001e67466247fe6), phy(6), device_name(0x5000039fe6e2ad8e)
scsi 0:0:7:0: enclosure logical id (0x5001517e3b0bf0bf), slot(6)
scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:8:0: Direct-Access ATA ST3000DM008-2DM1 CC26 PQ: 0 ANSI: 6
scsi 0:0:8:0: SATA: handle(0x0012), sas_addr(0x5001e67466247fef), phy(15), device_name(0x5000c500a4860a43)
scsi 0:0:8:0: enclosure logical id (0x5001517e3b0bf0bf), slot(15)
scsi 0:0:8:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:9:0: Enclosure Intel RES2SV240 0d00 PQ: 0 ANSI: 5
scsi 0:0:9:0: set ignore_delay_remove for handle(0x0013)
scsi 0:0:9:0: SES: handle(0x0013), sas_addr(0x5001e67466247ffd), phy(24), device_name(0x0000000000000000)
scsi 0:0:9:0: enclosure logical id (0x5001517e3b0bf0bf), slot(24)
ata1: SATA link down (SStatus 0 SControl 330)
ata11: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 5-3: new high-speed USB device number 2 using xhci_hcd
usb 1-9: new full-speed USB device number 2 using xhci_hcd
usb 5-3: New USB device found, idVendor=05e3, idProduct=0610
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
usb 5-3: Manufacturer: GenesysLogic
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3700.278 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6aacb8d13f9, max_idle_ns: 881590648309 ns
clocksource: Switched to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 330)
usb 6-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-3: New USB device found, idVendor=05e3, idProduct=0612
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB3.0 Hub
usb 6-3: Manufacturer: GenesysLogic
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
usb 1-9: New USB device found, idVendor=8087, idProduct=0aa7
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-3.3: new low-speed USB device number 3 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 330)
usb 5-3.3: New USB device found, idVendor=046d, idProduct=c31c
usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.3: Product: USB Keyboard
usb 5-3.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.0/0003:046D:C31C.0001/input/input2
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.1/0003:046D:C31C.0002/input/input3
usb 5-3.4: new low-speed USB device number 4 using xhci_hcd
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input1
usb 5-3.4: New USB device found, idVendor=046d, idProduct=c077
usb 5-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.4: Product: USB Optical Mouse
usb 5-3.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.4/5-3.4:1.0/0003:046D:C077.0003/input/input4
hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:30:00.3-3.4/input0
ata4: SATA link down (SStatus 0 SControl 330)
ata5: SATA link down (SStatus 0 SControl 330)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata6.00: Enabling discard_zeroes_data
sd 6:0:0:0: [sdj] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 6:0:0:0: [sdj] Write Protect is off
sd 6:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sdj: sdj1 sdj2
ata6.00: Enabling discard_zeroes_data
sd 0:0:8:0: [sdi] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:8:0: [sdi] 4096-byte physical blocks
sd 6:0:0:0: [sdj] supports TCG Opal
sd 6:0:0:0: [sdj] Attached SCSI disk
sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:1:0: [sdb] 4096-byte physical blocks
sd 0:0:3:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:3:0: [sdd] 4096-byte physical blocks
sd 0:0:2:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:2:0: [sdc] 4096-byte physical blocks
sd 0:0:6:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:6:0: [sdg] 4096-byte physical blocks
sd 0:0:5:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:5:0: [sdf] 4096-byte physical blocks
sd 0:0:7:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:7:0: [sdh] 4096-byte physical blocks
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:4:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:4:0: [sde] 4096-byte physical blocks
sd 0:0:8:0: [sdi] Write Protect is off
sd 0:0:8:0: [sdi] Mode Sense: 7f 00 10 08
sd 0:0:8:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdi: sdi1 sdi2
sd 0:0:8:0: [sdi] Attached SCSI disk
sd 0:0:4:0: [sde] Write Protect is off
sd 0:0:4:0: [sde] Mode Sense: 7f 00 10 08
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 7f 00 10 08
sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: 7f 00 10 08
sd 0:0:5:0: [sdf] Write Protect is off
sd 0:0:5:0: [sdf] Mode Sense: 7f 00 10 08
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 7f 00 10 08
sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 10 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:6:0: [sdg] Write Protect is off
sd 0:0:6:0: [sdg] Mode Sense: 7f 00 10 08
sd 0:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:7:0: [sdh] Write Protect is off
sd 0:0:7:0: [sdh] Mode Sense: 7f 00 10 08
sd 0:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
ata7: SATA link down (SStatus 0 SControl 330)
sde: sde1
sda: sda1
sdd: sdd1
sdf: sdf1
sdc: sdc1
sdb: sdb1
sdg: sdg1
sdh: sdh1
sd 0:0:4:0: [sde] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:5:0: [sdf] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:3:0: [sdd] Attached SCSI disk
sd 0:0:6:0: [sdg] Attached SCSI disk
sd 0:0:7:0: [sdh] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 330)
ata10: SATA link down (SStatus 0 SControl 300)
ses 0:0:9:0: Attached Enclosure device
random: crng init done
EXT4-fs (sdj2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-netctl.slice.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
spl: loading out-of-tree module taints kernel.
EXT4-fs (sdj2): re-mounted. Opts: data=ordered
icp: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
systemd-journald[392]: Received request to flush runtime journal from PID 1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
acpi_cpufreq: overriding BIOS provided _PSD data
ccp 0000:30:00.2: enabling device (0000 -> 0002)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
ccp 0000:30:00.2: ccp enabled
ccp 0000:30:00.2: psp initialization failed
ccp 0000:30:00.2: enabled
input: PC Speaker as /devices/platform/pcspkr/input/input5
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cryptd: max_cpu_qlen set to 1000
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
sp5100-tco: probe of sp5100-tco failed with error -16
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
mousedev: PS/2 mouse device common for all mice
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mlx4_core: Mellanox ConnectX core driver v4.0-0
mlx4_core: Initializing 0000:2f:00.0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:27:00.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:28:00.1: Disabling MSI
snd_hda_intel 0000:28:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:27:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
Bluetooth: hci0: read Intel version: 370810225019140f34
Bluetooth: hci0: Intel device is already patched. patch num: 34
iwlwifi 0000:27:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
iwlwifi 0000:27:00.0: reporting RF_KILL (radio disabled)
iwlwifi 0000:27:00.0: base HW address: 94:b8:6d:cd:e8:80
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
pps pps0: new PPS source ptp0
igb 0000:2a:00.0: added PHC on eth0
igb 0000:2a:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:2a:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:84:0b:af
igb 0000:2a:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:2a:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
Adding 33554428k swap on /swapfile. Priority:-2 extents:19 across:37175292k SSFS
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:27:00.0 wlp39s0: renamed from wlan0
MCE: In-kernel MCE decoding enabled.
atlantic 0000:2c:00.0 enp44s0: renamed from eth1
EDAC amd64: Node 0: DRAM ECC enabled.
EDAC amd64: F17h detected (node 0).
EDAC MC: UMC0 chip selects:
EDAC amd64: MC: 0: 32767MB 1: 32767MB
EDAC amd64: MC: 2: 32767MB 3: 32767MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: UMC1 chip selects:
EDAC amd64: MC: 0: 32767MB 1: 32767MB
EDAC amd64: MC: 2: 32767MB 3: 32767MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC MC0: Giving out device to module amd64_edac controller F17h: DEV 0000:00:18.3 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED)
AMD64 EDAC driver v3.5.0
igb 0000:2a:00.0 enp42s0: renamed from eth0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:03.0/0000:21:00.0/0000:26:03.0/0000:28:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:03.0/0000:21:00.0/0000:26:03.0/0000:28:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:03.0/0000:21:00.0/0000:26:03.0/0000:28:00.1/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:03.0/0000:21:00.0/0000:26:03.0/0000:28:00.1/sound/card0/input9
ZFS: Loaded module v0.7.0-1412_g1a5b96b8e, ZFS pool version 5000, ZFS filesystem version 5
FAT-fs (sdj1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
mlx4_core 0000:2f:00.0: DMFS high rate steer mode is: disabled performance optimized steering
mlx4_core 0000:2f:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s
mlx4_core 0000:2f:00.0: PCIe link width is x8, device supports x8
mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
mlx4_ib_add: counter index 0 for port 1 allocated 0
mlx4_ib_add: counter index 1 for port 2 allocated 0
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (iser)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
Rounding down aligned max_sectors from 4294967295 to 4294967288
8021q: 802.1Q VLAN Support v1.8
IPv6: ADDRCONF(NETDEV_UP): enp44s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp42s0: link is not ready
8021q: adding VLAN 0 to HW filter on device enp42s0
atlantic: link change old 0 new 10000
IPv6: ADDRCONF(NETDEV_CHANGE): enp44s0: link becomes ready
usb 5-3: USB disconnect, device number 2
usb 5-3.3: USB disconnect, device number 3
usb 6-3: USB disconnect, device number 2
usb 5-3.4: USB disconnect, device number 4
usb 6-3: new SuperSpeed USB device number 3 using xhci_hcd
usb 6-3: New USB device found, idVendor=05e3, idProduct=0612
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB3.0 Hub
usb 6-3: Manufacturer: GenesysLogic
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
usb 5-3: new high-speed USB device number 5 using xhci_hcd
usb 5-3: New USB device found, idVendor=05e3, idProduct=0610
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
usb 5-3: Manufacturer: GenesysLogic
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
usb 5-3.3: new low-speed USB device number 6 using xhci_hcd
usb 5-3.3: New USB device found, idVendor=046d, idProduct=c31c
usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.3: Product: USB Keyboard
usb 5-3.3: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.0/0003:046D:C31C.0004/input/input10
hid-generic 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.1/0003:046D:C31C.0005/input/input11
hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input1
usb 5-3.4: new low-speed USB device number 7 using xhci_hcd
usb 5-3.4: New USB device found, idVendor=046d, idProduct=c077
usb 5-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.4: Product: USB Optical Mouse
usb 5-3.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.4/5-3.4:1.0/0003:046D:C077.0006/input/input12
hid-generic 0003:046D:C077.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:30:00.3-3.4/input0
usb 5-3: USB disconnect, device number 5
usb 5-3.3: USB disconnect, device number 6
usb 6-3: USB disconnect, device number 3
usb 5-3.4: USB disconnect, device number 7
usb 6-3: new SuperSpeed USB device number 4 using xhci_hcd
usb 6-3: New USB device found, idVendor=05e3, idProduct=0612
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB3.0 Hub
usb 6-3: Manufacturer: GenesysLogic
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
usb 5-3: new high-speed USB device number 8 using xhci_hcd
usb 5-3: New USB device found, idVendor=05e3, idProduct=0610
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
usb 5-3: Manufacturer: GenesysLogic
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
usb 5-3.3: new low-speed USB device number 9 using xhci_hcd
usb 5-3.3: New USB device found, idVendor=046d, idProduct=c31c
usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.3: Product: USB Keyboard
usb 5-3.3: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.0/0003:046D:C31C.0007/input/input13
hid-generic 0003:046D:C31C.0007: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.1/0003:046D:C31C.0008/input/input14
hid-generic 0003:046D:C31C.0008: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input1
usb 5-3.4: new low-speed USB device number 10 using xhci_hcd
usb 5-3.4: New USB device found, idVendor=046d, idProduct=c077
usb 5-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.4: Product: USB Optical Mouse
usb 5-3.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.4/5-3.4:1.0/0003:046D:C077.0009/input/input15
hid-generic 0003:046D:C077.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:30:00.3-3.4/input0
usb 5-3: USB disconnect, device number 8
usb 5-3.3: USB disconnect, device number 9
usb 6-3: USB disconnect, device number 4
usb 5-3.4: USB disconnect, device number 10
usb 6-3: new SuperSpeed USB device number 5 using xhci_hcd
usb 6-3: New USB device found, idVendor=05e3, idProduct=0612
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB3.0 Hub
usb 6-3: Manufacturer: GenesysLogic
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
usb 5-3: new high-speed USB device number 11 using xhci_hcd
usb 5-3: New USB device found, idVendor=05e3, idProduct=0610
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
usb 5-3: Manufacturer: GenesysLogic
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
usb 5-3.3: new low-speed USB device number 12 using xhci_hcd
usb 5-3.3: New USB device found, idVendor=046d, idProduct=c31c
usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.3: Product: USB Keyboard
usb 5-3.3: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.0/0003:046D:C31C.000A/input/input16
hid-generic 0003:046D:C31C.000A: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.3/5-3.3:1.1/0003:046D:C31C.000B/input/input17
hid-generic 0003:046D:C31C.000B: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:30:00.3-3.3/input1
usb 5-3.4: new low-speed USB device number 13 using xhci_hcd
usb 5-3.4: New USB device found, idVendor=046d, idProduct=c077
usb 5-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3.4: Product: USB Optical Mouse
usb 5-3.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:30:00.3/usb5/5-3/5-3.4/5-3.4:1.0/0003:046D:C077.000C/input/input18
hid-generic 0003:046D:C077.000C: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:30:00.3-3.4/input0
usb 5-3: USB disconnect, device number 11
usb 5-3.3: USB disconnect, device number 12
usb 6-3: USB disconnect, device number 5
usb 5-3.4: USB disconnect, device number 13
EXT4-fs (sdi1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
ntfs: driver 2.1.32 [Flags: R/W MODULE].
ntfs: volume version 3.1.